In the spring, your dealer will typically check a heat pump or air
conditioner for all or some of the following:
 | operating pressures
 | refrigerant charge
 | filter condition
 | compressor
 | fan motor
 | capacitors
 | belts
 | crankcase heaters
 | coils cleaning
 | lubrication of moving parts |
| | | | | | | | |
In the fall, you can expect a dealer to check your furnace in the
following areas:
 | burner and pilot assemblies
 | cracks in the heat exchanger
 | check the pilot thermocouple
 | examine the filter and check vent piping
 | test the electronic ignition
 | test the fan
 | test the limit switch
 | burner adjustments
 | measure manifold gas pressure
 | measure temperature rise
 | carbon monoxide test
 | set the heat anticipator
 | check and adjust belt tension
 | examine the draft diverter
 | lubricate the fan motor |
| | | | | | | | | | | | | |
If you need help call Adams Refrigeration
602 269 6447
|